Teflon PTFE Seamless/Seam Fusing Machine Conveyor Belt

Teflon PTFE Seamless/Seam Fusing Machine Conveyor Belt
PTFE seamless/seam fusing machine belts are are specifically engineered with the mechanical strength needed for the fusing and laminating industries. Its non-stick surface, thermal transfer and high temperature resistance characteristics ensure...
Product Details

PTFE Seamless/Seam Fusing Machine Belt

PTFE seamless/seam fusing machine belts are are specifically engineered with the mechanical strength needed for the fusing and laminating industries. Its non-stick surface, thermal transfer and high temperature resistance characteristics ensure the flow of woven and non-woven materials through the fusing and lamination process. These belts are for fusing machines, such as Oshima, Kannegiesser, Meyer, Macpi, and many others.


Zobon currently provide the following three types of belts:

1.Seamless Fusing Belts means fusing belt without any joint.It is made from woven fiberglass or Kevlar coated with ptfe resin.The seamless belts have a smooth surface, excellent antistatic effect (black version), long life.It overcomed the shortage of traditional fusing belts with joint.


2.Seam Fusing Belts means fusing belt with joint.It is the most common fusing belts due to its lower cost.Three joint methods are provided as below:

Overlap Belt Joint: Overlap joints are a simple and easy joint to use where having an even surface is not critical. This is the most popular seam because it is strong inexpensive and easiest to produce. The disadvantage of the overlap seam is that it is not very smooth and in some applications the seam may mark the material being fused. In addition, because the overlap seam is more than double the thickness of the rest of the belt it is slightly stiffer and suffers from early flex fatigue and very often breaks.

Scarfed Belt Joint: A scarf joint is similar the overlap but offer a smooth transition for the product to run offering no lip for products to catch on.This is the smoothest, strongest, most flexible seam available today. It resembles a 30 mm overlap seam but is much smoother and more flexible. There is no almost double thickness, as the mating surfaces are carefully ground to a taper and securely welded.

Angled Belt Joint: This seam is cut at a slight angle helping the belt to roll easily over the fusing machine rollers, reducing flex fatigue. The angle of the overlap can be varied, so that the splice does not run over the conveyor pulleys in one line. 45° and 70° are popular.


3.Laminated Fusing Belts also called two ply or double layer fusing belts.This belt use static-resistance varnished cloth inside and tearing-resistance fiberglass cloth outside, 2ply belt has a great improvement on its intensity, long using life, well balanced thickness, excellent deflecting preventing capacity, smooth surface, it's better for super thin fabric fusing.


Specification:

PTFE Fusing Belts

Standard Thickness: 0.35~0.40mm

Width: 20~1500mm

Perimeter: (mm)

1360

1380

1440

1470

1510

1520

1530

1540

1550

1560

1580

1600

1640

1660

1680

1730

1740

1780

1820

1830

1840

1850

1870

1880

1950

2000

2040

2100

2230

2240

2250

2310

2320

2420

2440

2450

2500

2600

2630

2750

2800

2820

2850

2880

2900

3050

3080

3090

3200

3450

3540

3590

3820

3850

3890

3900

3920

3930

4200

4270

5100

5270

5400

5640

5800

6000

6440

6700




Feedback